Options:
      --abstract-unix-socket <path>     Connect via abstract Unix domain socket
      --alt-svc <file name>     Enable alt-svc with this cache file
      --anyauth             Pick any authentication method
  -a, --append              Append to target file when uploading
      --basic               Use HTTP Basic Authentication
      --cacert <file>       CA certificate to verify peer against
      --capath <dir>        CA directory to verify peer against
  -E, --cert <certificate[:password]>   Client certificate file and password
      --cert-status         Verify the status of the server certificate
      --cert-type <type>    Certificate file type (DER/PEM/ENG)
      --ciphers <list of ciphers>   SSL ciphers to use
      --compressed          Request compressed response
      --compressed-ssh      Enable SSH compression
  -K, --config <file>       Read config from a file
      --connect-timeout <seconds>   Maximum time allowed for connection
      --connect-to <HOST1:PORT1:HOST2:PORT2>    Connect to host
  -C, --continue-at <offset>    Resumed transfer offset
  -b, --cookie <data|filename>  Send cookies from string/file
  -c, --cookie-jar <filename>   Write cookies to <filename> after operation
      --create-dirs         Create necessary local directory hierarchy
      --crlf                Convert LF to CRLF in upload
      --crlfile <file>      Get a CRL list in PEM format from the given file
  -d, --data <data>         HTTP POST data
      --data-ascii <data>   HTTP POST ASCII data
      --data-binary <data>  HTTP POST binary data
      --data-raw <data>     HTTP POST data  '@' allowed
      --data-urlencode <data>   HTTP POST data url encoded
      --delegation <LEVEL>  GSS-API delegation permission
      --digest              Use HTTP Digest Authentication
  -q, --disable             Disable .curlrc
      --disable-eprt        Inhibit using EPRT or LPRT
      --disable-epsv        Inhibit using EPSV
      --disallow-username-in-url    Disallow username in url
      --dns-interface <interface>   Interface to use for DNS requests
      --dns-ipv4-addr <address>     IPv4 address to use for DNS requests
      --dns-ipv6-addr <address>     IPv6 address to use for DNS requests
      --dns-servers <addresses>     DNS server addrs to use
      --doh-url <URL>       Resolve host names over DOH
  -D, --dump-header <filename>      Write the received headers to <filename>
      --egd-file <file>     EGD socket path for random data
      --engine <name>       Crypto engine to use
      --etag-save <file>    Get an ETag from response header and save it to a FILE
      --etag-compare <file> Get an ETag from a file and send a conditional request
      --expect100-timeout <seconds>     How long to wait for 100-continue
  -f, --fail                Fail silently (no output at all) on HTTP errors
      --fail-early          Fail on first transfer error  do not continue
      --false-start         Enable TLS False Start
  -F, --form <name=content>         Specify multipart MIME data
      --form-string <name=string>   Specify multipart MIME data
      --ftp-account <data>          Account data string
      --ftp-alternative-to-user <command>   String to replace USER [name]
      --ftp-create-dirs     Create the remote dirs if not present
      --ftp-method <method> Control CWD usage
      --ftp-pasv            Use PASV/EPSV instead of PORT
  -P, --ftp-port <address>  Use PORT instead of PASV
      --ftp-pret            Send PRET before PASV
      --ftp-skip-pasv-ip    Skip the IP address for PASV
      --ftp-ssl-ccc         Send CCC after authenticating
      --ftp-ssl-ccc-mode <active/passive>   Set CCC mode
      --ftp-ssl-control     Require SSL/TLS for FTP login  clear for transfer
  -G, --get                 Put the post data in the URL and use GET
  -g, --globoff             Disable URL sequences and ranges using {} and []
      --happy-eyeballs-timeout-ms <milliseconds>    How long to wait in milliseconds for IPv6 before trying IPv4
      --haproxy-protocol    Send HAProxy PROXY protocol v1 header
  -I, --head                Show document info only
  -h, --header <header/@file>   Pass custom header(s) to server
      --hostpubmd5 <md5>    Acceptable MD5 hash of the host public key
      --http0.9             Allow HTTP 0.9 responses
  -0, --http1.0             Use HTTP 1.0
      --http1.1             Use HTTP 1.1
      --http2               Use HTTP 2
      --http2-prior-knowledge   Use HTTP 2 without HTTP/1.1 Upgrade
      --http3               Use HTTP v3
      --ignore-content-length   Ignore the size of the remote resource
  -i, --include             Include protocol response headers in the output
  -k, --insecure            Allow insecure server connections when using SSL
      --interface <name>    Use network INTERFACE (or address)
  -4, --ipv4                Resolve names to IPv4 addresses
  -6, --ipv6                Resolve names to IPv6 addresses
  -j, --junk-session-cookies        Ignore session cookies read from file
      --keepalive-time <seconds>    Interval time for keepalive probes
      --key <key>           Private key file name
      --key-type <type>     Private key file type (DER/PEM/ENG)
      --krb <level>         Enable Kerberos with security <level>
      --libcurl <file>      Dump libcurl equivalent code of this command line
      --limit-rate <speed>  Limit transfer speed to RATE
  -l, --list-only           List only mode
      --local-port <num/range>  Force use of RANGE for local port numbers
  -L, --location            Follow redirects
      --location-trusted    Like --location  and send auth to other hosts
      --login-options <options>     Server login options
      --mail-auth <address> Originator address of the original email
      --mail-from <address> Mail from this address
      --mail-rcpt <address> Mail to this address
  -M, --manual              Display the full manual
      --max-filesize <bytes>    Maximum file size to download
      --max-redirs <num>    Maximum number of redirects allowed
  -m, --max-time <seconds>  Maximum time allowed for the transfer
      --metalink            Process given URLs as metalink XML file
      --negotiate           Use HTTP Negotiate (SPNEGO) authentication
  -n, --netrc               Must read .netrc for user name and password
      --netrc-file <filename>   Specify FILE for netrc
      --netrc-optional      Use either .netrc or URL
  -:, --next                Make next URL use its separate set of options
      --no-alpn             Disable the ALPN TLS extension
  -N, --no-buffer           Disable buffering of the output stream
      --no-keepalive        Disable TCP keepalive on the connection
      --no-npn              Disable the NPN TLS extension
      --no-progress-meter   Do not show the progress meter
      --no-sessionid        Disable SSL session-ID reusing
      --noproxy <no-proxy-list>     List of hosts which do not use proxy
      --ntlm                Use HTTP NTLM authentication
      --ntlm-wb             Use HTTP NTLM authentication with winbind
      --oauth2-bearer <token>   OAuth 2 Bearer Token
  -o, --output <file>       Write to file instead of stdout
  -Z, --parallel            Perform transfers in parallel
      --parallel-immediate  Do not wait for multiplexing (with --parallel)
      --parallel-max        Maximum concurrency for parallel transfers
      --pass <phrase>       Pass phrase for the private key
      --path-as-is          Do not squash .. sequences in URL path
      --pinnedpubkey <hashes>   FILE/HASHES Public key to verify peer against
      --post301             Do not switch to GET after following a 301
      --post302             Do not switch to GET after following a 302
      --post303             Do not switch to GET after following a 303
      --preproxy <[protocol://]host[:port]>     Use this proxy first
  -#, --progress-bar        Display transfer progress as a bar
      --proto <protocols>   Enable/disable PROTOCOLS
      --proto-default <protocol>        Use PROTOCOL for any URL missing a scheme
      --proto-redir <protocols>         Enable/disable PROTOCOLS on redirect
  -x, --proxy <[protocol://]host[:port]>    Use this proxy
      --proxy-anyauth       Pick any proxy authentication method
      --proxy-basic         Use Basic authentication on the proxy
      --proxy-cacert <file>     CA certificate to verify peer against for proxy
      --proxy-capath <dir>      CA directory to verify peer against for proxy
      --proxy-cert <cert[:passwd]>  Set client certificate for proxy
      --proxy-cert-type <type>      Client certificate type for HTTPS proxy
      --proxy-ciphers <list>        SSL ciphers to use for proxy
      --proxy-crlfile <file>        Set a CRL list for proxy
      --proxy-digest        Use Digest authentication on the proxy
      --proxy-header <header/@file>     Pass custom header(s) to proxy
      --proxy-insecure      Do HTTPS proxy connections without verifying the proxy
      --proxy-key <key>     Private key for HTTPS proxy
      --proxy-key-type <type>       Private key file type for proxy
      --proxy-negotiate     Use HTTP Negotiate (SPNEGO) authentication on the proxy
      --proxy-ntlm          Use NTLM authentication on the proxy
      --proxy-pass <phrase>     Pass phrase for the private key for HTTPS proxy
      --proxy-pinnedpubkey <hashes>     FILE/HASHES public key to verify proxy with
      --proxy-service-name <name>   SPNEGO proxy service name
      --proxy-ssl-allow-beast       Allow security flaw for interop for HTTPS proxy
      --proxy-tls13-ciphers <list>  TLS 1.3 ciphersuites for proxy (OpenSSL)
      --proxy-tlsauthtype <type>    TLS authentication type for HTTPS proxy
      --proxy-tlspassword <string>  TLS password for HTTPS proxy
      --proxy-tlsuser <name>        TLS username for HTTPS proxy
      --proxy-tlsv1         Use TLSv1 for HTTPS proxy
  -U, --proxy-user <user:password>  Proxy user and password
      --proxy1.0 <host[:port]>      Use HTTP/1.0 proxy on given port
  -p, --proxytunnel         Operate through an HTTP proxy tunnel (using CONNECT)
      --pubkey <key>        SSH Public key file name
  -Q, --quote               Send command(s) to server before transfer
      --random-file <file>  File for reading random data from
  -r, --range <range>       Retrieve only the bytes within RANGE
      --raw                 Do HTTP 'raw'; no transfer decoding
  -e, --referer <URL>       Referrer URL
  -J, --remote-header-name  Use the header-provided filename
  -O, --remote-name         Write output to a file named as the remote file
      --remote-name-all     Use the remote file name for all URLs
  -R, --remote-time         Set the remote file's time on the local output
  -X, --request <command>   Specify request command to use
      --request-target      Specify the target for this request
      --resolve <host:port:address[ address]...>    Resolve the host+port to this address
      --retry <num>         Retry request if transient problems occur
      --retry-connrefused   Retry on connection refused (use with --retry)
      --retry-delay <seconds>       Wait time between retries
      --retry-max-time <seconds>    Retry only within this period
      --sasl-authzid <identity>     Use this identity to act as during SASL PLAIN authentication
      --sasl-ir             Enable initial response in SASL authentication
      --service-name <name> SPNEGO service name
  -S, --show-error          Show error even when -s is used
  -s, --silent              Silent mode
      --socks4 <host[:port]>    SOCKS4 proxy on given host + port
      --socks4a <host[:port]>   SOCKS4a proxy on given host + port
      --socks5 <host[:port]>    SOCKS5 proxy on given host + port
      --socks5-basic        Enable username/password auth for SOCKS5 proxies
      --socks5-gssapi       Enable GSS-API auth for SOCKS5 proxies
      --socks5-gssapi-nec   Compatibility with NEC SOCKS5 server
      --socks5-gssapi-service <name>    SOCKS5 proxy service name for GSS-API
      --socks5-hostname <host[:port]>   SOCKS5 proxy  pass host name to proxy
  -Y, --speed-limit <speed>     Stop transfers slower than this
  -y, --speed-time <seconds>    Trigger 'speed-limit' abort after this time
      --ssl                 Try SSL/TLS
      --ssl-allow-beast     Allow security flaw to improve interop
      --ssl-no-revoke       Disable cert revocation checks (Schannel)
      --ssl-reqd            Require SSL/TLS
  -2, --sslv2               Use SSLv2
  -3, --sslv3               Use SSLv3
      --stderr              Where to redirect stderr
      --styled-output       Enable styled output for HTTP headers
      --suppress-connect-headers    Suppress proxy CONNECT response headers
      --tcp-fastopen        Use TCP Fast Open
      --tcp-nodelay         Use the TCP_NODELAY option
  -t, --telnet-option <opt=val>     Set telnet option
      --tftp-blksize <value>        Set TFTP BLKSIZE option
      --tftp-no-options     Do not send any TFTP options
  -z, --time-cond <time>    Transfer based on a time condition
      --tls-max <VERSION>   Set maximum allowed TLS version
      --tls13-ciphers <list>    TLS 1.3 ciphersuites (OpenSSL)
      --tlsauthtype <type>  TLS authentication type
      --tlspassword         TLS password
      --tlsuser <name>      TLS user name
  -1, --tlsv1               Use TLSv1.0 or greater
      --tlsv1.0             Use TLSv1.0 or greater
      --tlsv1.1             Use TLSv1.1 or greater
      --tlsv1.2             Use TLSv1.2 or greater
      --tlsv1.3             Use TLSv1.3 or greater
      --tr-encoding         Request compressed transfer encoding
      --trace <file>        Write a debug trace to FILE
      --trace-ascii <file>  Like --trace  but without hex output
      --trace-time          Add time stamps to trace/verbose output
      --unix-socket <path>  Connect through this Unix domain socket
  -T, --upload-file <file>  Transfer local FILE to destination
      --url <url>           URL to work with
  -B, --use-ascii           Use ASCII/text transfer
  -u, --user <user:password>    Server user and password
  -A, --user-agent <name>   Send User-Agent <name> to server
  -v, --verbose             Make the operation more talkative
  -w, --write-out <format>  Use output FORMAT after completion
      --xattr               Store metadata in extended file attributes
  -H, --help                display this help and exit
  -V, --version             output version information and exit
