# Get started-with GenomAutomorphism

Robersy Sanchez1*

1Department of Biology. Pennsylvania State University, University Park, PA 16802

*rus547@psu.edu

#### 26 April 2023

#### Abstract

A fast introduction into the analysis of DNA mutational events by means of automorphisms between two DNA sequences algebraically represented as Abelian finite group.

# 1 Overview

This is a R package to compute the automorphisms between pairwise aligned DNA sequences represented as elements from a Genomic Abelian group as described in reference (1). In a general scenario, whole chromosomes or genomic regions from a population (from any species or close related species) can be algebraically represented as a direct sum of cyclic groups or more specifically Abelian p-groups. Basically, we propose the representation of multiple sequence alignments (MSA) of length N as a finite Abelian group created by the direct sum of Abelian group of prime-power order:

\[ \qquad G = (\mathbb{Z}_{p^{\alpha_{1}}_1})^{n_1} \oplus (\mathbb{Z}_{p^{\alpha_{2}}_1})^{n_2} \oplus \dots \oplus (\mathbb{Z}_{p^{\alpha_{k}}_k})^{n_k} \]

Where, the \(p_i\)’s are prime numbers, \(\alpha_i \in \mathbb{N}\) and \(\mathbb{Z}_{p^{\alpha_{i}}_i}\) is the group of integer modulo \(p^{\alpha_{i}}_i\).

For the purpose of estimating the automorphism between two aligned DNA sequences, \(p^{\alpha_{i}}_i \in \{5, 2^6, 5^3 \}\).

## 1.1 Automorphisms

Herein, automorphisms are considered algebraic descriptions of mutational event observed in codon sequences represented on different Abelian groups. In particular, as described in references (3-4), for each representation of the codon set on a defined Abelian group there are 24 possible isomorphic Abelian groups. These Abelian groups can be labeled based on the DNA base-order used to generate them. The set of 24 Abelian groups can be described as a group isomorphic to the symmetric group of degree four (\(S_4\), see reference (4)).

For further support about the symmetric group on the 24 Abelian group of genetic-code cubes, users can also see Symmetric Group of the Genetic-CodeCubes., specifically the Mathematica notebook IntroductionToZ5GeneticCodeVectorSpace.nb and interact with it using Wolfram Player, freely available (for Windows and Linux OS) at, https://www.wolfram.com/player/.

## 1.2 Load the R libraries

    library(Biostrings)
    library(GenomAutomorphism)

# 2 Read the alignment FASTA and encode the sequences

A pairwise sequence alignment of protein coding regions SARS coronavirus GZ02 (GenBank: AY390556.1) and Bat SARS-like coronavirus isolate Rs7327 (GenBank: KY417151.1) is provided with the package.

    data(covid_aln, package = "GenomAutomorphism")
    covid_aln
    #> DNAMultipleAlignment with 2 rows and 29166 columns
    #>      aln                                                                                            names
    #> [1] ATGGAGAGCCTTGTTCTTGGTGTCAACGAGAAAACACACGTCCAAC...CAAAATTCCATGAGTGGAGCTTCTGCTGATTCAACTCAGGCATAA lcl|AY390556.1_cd...
    #> [2] ATGGAGAGCCTTGTTCTTGGTGTCAACGAGAAAACACACGTCCAAC...CAAAATTCCATGAGTGGAGCTTCTGCTGATTCAACTCAGGCATAA lcl|KY417151.1_cd...

# 3 Group representations

Group operations defined on the sets of DNA bases and codons are associated to physicochemical or/and biophysical relationships between DNA bases and between codons and aminoacids. In other words, a proper definition of a group operation on the set of bases or on the set of codons will encode the physicochemical or/and biophysical relationships between the set’s elements. Thus, by group operations defined on the set of bases or on the set of codons, we understand an encoding applied to represent specified physicochemical or/and biophysical relationships as group operations between the elements of the set. Then, we shall say that such an encoding permits the representation of DNA bases, codons, genes, and genomic sequences as elements from algebraic structures.

The DNA base set can be represented in 24 possible base orders, which leads to 24 possible representations of the genetic code. Each genetic code representation base-triplets on the Galois field GF(4) (or in GF(5)) leads to genetic code vector 3D-space, which is mathematically equivalent to a cube inserted in the 3D space (1). Each cube is denoted according to the corresponding base order.

Given a base-order, say ‘ACGT’, the Abelian group defined on this ordered set is isomorphic to the Abelian group defined on the set of integers modulo 4 (\(\mathbb{Z}_{4}\)). In practical terms, this is equivalent to replace each DNA base by the corresponding integer element. The base replacement in cube “ACGT and group”Z4" (\(\mathbb{Z}_{4}\)) is:

    base2int("ACGT", group = "Z4", cube = "ACGT")
    #> [1] 0 1 2 3

The base replacement in cube "ACGT and group ‘Z5’ (\(\mathbb{Z}_{5}\)):

    base2int("ACGT", group = "Z5", cube = "ACGT")
    #> [1] 1 2 3 4

After the DNA sequence is read, the corresponding codon sequences can be represented in the Abelian group \(\mathbb{Z}_{64}\) (i.e., the set of integers remainder modulo 64). The codon coordinates are requested on the cube ACGT. Following reference (4)), cubes are labeled based on the order of DNA bases used to define the sum operation.

    codons <- codon_coord(
                        codon = covid_aln,
                        cube = "ACGT",
                        group = "Z64",
                        chr = 1L,
                        strand = "+",
                        start = 1,
                        end = 750)
    codons
    #> CodonGroup object with 250 ranges and 4 metadata columns:
    #>         seqnames    ranges strand |        seq1        seq2      coord1      coord2
    #>            <Rle> <IRanges>  <Rle> | <character> <character> <character> <character>
    #>     [1]        1         1      + |         ATG         ATG          50          50
    #>     [2]        1         2      + |         GAG         GAG          10          10
    #>     [3]        1         3      + |         AGC         AGC          33          33
    #>     [4]        1         4      + |         CTT         CTT          55          55
    #>     [5]        1         5      + |         GTT         GTT          59          59
    #>     ...      ...       ...    ... .         ...         ...         ...         ...
    #>   [246]        1       246      + |         GAT         GAT          11          11
    #>   [247]        1       247      + |         AAG         AAG           2           2
    #>   [248]        1       248      + |         AGC         AGC          33          33
    #>   [249]        1       249      + |         TAC         TAT          13          15
    #>   [250]        1       250      + |         GAG         GAG          10          10
    #>   -------
    #>   seqinfo: 1 sequence from an unspecified genome; no seqlengths

The codon sequences (seq1 and seq2) with their corresponding coordinates (left) are returned, as well as the coordinated representation on \(\mathbb{Z}_{64}\) (coord1 and coord2).

## 3.1 “Dual” genetic-code cubes

The particular interest are the coordinate representation on “dual” genetic-code cubes. These are cubes where codons with complementary base pairs have the same coordinates in the corresponding cubes, as shown in reference (4)). Each pair of “dual” cubes integrates a group.

For example, let’s consider the complementary codons “ACG” and “TGC”, with complementary base pairs: A::T, C:::G, and G:::C, where symbol “:” denotes the hydrogen bonds between the bases.

    x0 <- c("ACG", "TGC")
    x1 <- DNAStringSet(x0)
    x1
    #> DNAStringSet object of length 2:
    #>     width seq
    #> [1]     3 ACG
    #> [2]     3 TGC

Their representations on the dual cubes “ACGT” and “TGCA” on \(\mathbb{Z}_{4}\) are:

    x2 <- base_coord(x1, cube = "ACGT")
    x2
    #> BaseGroup object with 3 ranges and 4 metadata columns:
    #>       seqnames    ranges strand |        seq1        seq2    coord1    coord2
    #>          <Rle> <IRanges>  <Rle> | <character> <character> <numeric> <numeric>
    #>   [1]        1         1      + |           A           T         0         3
    #>   [2]        1         2      + |           C           G         1         2
    #>   [3]        1         3      + |           G           C         2         1
    #>   -------
    #>   seqinfo: 1 sequence from an unspecified genome; no seqlengths

    x2. <- base_coord(x1, cube = "TGCA")
    x2.
    #> BaseGroup object with 3 ranges and 4 metadata columns:
    #>       seqnames    ranges strand |        seq1        seq2    coord1    coord2
    #>          <Rle> <IRanges>  <Rle> | <character> <character> <numeric> <numeric>
    #>   [1]        1         1      + |           A           T         3         0
    #>   [2]        1         2      + |           C           G         2         1
    #>   [3]        1         3      + |           G           C         1         2
    #>   -------
    #>   seqinfo: 1 sequence from an unspecified genome; no seqlengths

The sum of base coordinates modulo \(\mathbb{Z}_{4}\) is 3.

    ## cube "ACGT"
    (x2$coord1 + x2$coord2) %% 4
    #> [1] 3 3 3

    ## cube "TGCA"
    (x2.$coord1 + x2.$coord2) %% 4
    #> [1] 3 3 3

The same result for the same codon on different cubes

    ## Codon ACG
    (x2$coord1 + x2.$coord1) %% 4
    #> [1] 3 3 3

    ## Codon TGC
    (x2$coord2 + x2.$coord2) %% 4
    #> [1] 3 3 3

Their codon representation on \(\mathbb{Z}_{64}\) are:

    ## cube ACGT
    x3 <- codon_coord(codon = x2, group = "Z64")
    x3
    #> CodonGroup object with 1 range and 4 metadata columns:
    #>       seqnames    ranges strand |        seq1        seq2      coord1      coord2
    #>          <Rle> <IRanges>  <Rle> | <character> <character> <character> <character>
    #>   [1]        1         1      + |         ACG         TGC          18          45
    #>   -------
    #>   seqinfo: 1 sequence from an unspecified genome; no seqlengths

    ## cube TGCA
    x3. <- codon_coord(codon = x2., group = "Z64")
    x3.
    #> CodonGroup object with 1 range and 4 metadata columns:
    #>       seqnames    ranges strand |        seq1        seq2      coord1      coord2
    #>          <Rle> <IRanges>  <Rle> | <character> <character> <character> <character>
    #>   [1]        1         1      + |         ACG         TGC          45          18
    #>   -------
    #>   seqinfo: 1 sequence from an unspecified genome; no seqlengths

The sum of base coordinates modulo \(\mathbb{Z}_{64}\) is 63.

    ## cube "ACGT"
    (as.numeric(x3$coord1) + as.numeric(x3$coord2)) %% 64
    #> [1] 63

    ## cube "TGCA"
    (as.numeric(x3.$coord1) + as.numeric(x3.$coord2)) %% 64
    #> [1] 63

The same result for the same codon on different cubes

    ## Codon ACG
    (as.numeric(x3$coord1) + as.numeric(x3.$coord1)) %% 64
    #> [1] 63

    ## Codon TGC
    (as.numeric(x3$coord2) + as.numeric(x3.$coord2)) %% 64
    #> [1] 63

# 4 Automorphisms on \(\mathbb{Z}_{64}\)

Automorphisms can be computed starting directly from the FASTA file. Notice that we can work only with genomic regions of our interest by giving the start and end alignment coordinates. In \(\mathbb{Z}_{64}\) automorphisms are described as functions \(f(x) = k\,x\quad mod\,64\), where \(k\) and \(x\) are elements from the set of integers modulo 64. Below, in function automorphism three important arguments are given values: group = “Z64”, cube = c(“ACGT”, “TGCA”), and cube_alt = c(“CATG”, “GTAC”).

In groups “Z64” and “Z125” not all the mutational events can be described as automorphisms from a given cube. The analysis of automorphisms is then accomplished in the set of dual genetic-code cubes. A character string denoting pairs of dual genetic-code cubes, is given as argument for cube. Setting for group specifies on which group the automorphisms will be computed. These groups can be: “Z5”, “Z64”, “Z125”, and “Z5^3”.

If automorphisms are not found in first set of dual cubes, then the algorithm search for automorphisms in a alternative set of dual cubes.

    autm <- automorphisms(
                        seqs = covid_aln,
                        group = "Z64",
                        cube = c("ACGT", "TGCA"),
                        cube_alt = c("CATG", "GTAC"),
                        start = 1,
                        end = 750,
                        verbose = FALSE)
    #> Warning: 'IS_BIOC_BUILD_MACHINE' environment variable detected, setting BiocParallel workers to 4 (was 31)
    autm
    #> Automorphism object with 250 ranges and 8 metadata columns:
    #>         seqnames    ranges strand |        seq1        seq2         aa1         aa2    coord1    coord2      autm
    #>            <Rle> <IRanges>  <Rle> | <character> <character> <character> <character> <numeric> <numeric> <numeric>
    #>     [1]        1         1      + |         ATG         ATG           M           M        50        50         1
    #>     [2]        1         2      + |         GAG         GAG           E           E        10        10         1
    #>     [3]        1         3      + |         AGC         AGC           S           S        33        33         1
    #>     [4]        1         4      + |         CTT         CTT           L           L        55        55         1
    #>     [5]        1         5      + |         GTT         GTT           V           V        59        59         1
    #>     ...      ...       ...    ... .         ...         ...         ...         ...       ...       ...       ...
    #>   [246]        1       246      + |         GAT         GAT           D           D        11        11         1
    #>   [247]        1       247      + |         AAG         AAG           K           K         2         2         1
    #>   [248]        1       248      + |         AGC         AGC           S           S        33        33         1
    #>   [249]        1       249      + |         TAC         TAT           Y           Y        13        15        11
    #>   [250]        1       250      + |         GAG         GAG           E           E        10        10         1
    #>                cube
    #>         <character>
    #>     [1]        ACGT
    #>     [2]        ACGT
    #>     [3]        ACGT
    #>     [4]        ACGT
    #>     [5]        ACGT
    #>     ...         ...
    #>   [246]        ACGT
    #>   [247]        ACGT
    #>   [248]        ACGT
    #>   [249]        ACGT
    #>   [250]        ACGT
    #>   -------
    #>   seqinfo: 1 sequence from an unspecified genome; no seqlengths

Observe that two new columns were added, the automorphism coefficient \(k\) (named as autm) and the genetic-code cube where the automorphism was found. By convention the DNA sequence is given for the positive strand. Since the dual cube of “ACGT” corresponds to the complementary base order TGCA, automorphisms described by the cube TGCA represent mutational events affecting the DNA negative strand (-).

The last result can be summarized by gene regions as follow:

    aut_range <- automorphismByRanges(autm)
    aut_range
    #> GRanges object with 9 ranges and 1 metadata column:
    #>       seqnames    ranges strand |        cube
    #>          <Rle> <IRanges>  <Rle> | <character>
    #>   [1]        1     1-102      + |        ACGT
    #>   [2]        1       103      - |        TGCA
    #>   [3]        1   104-105      + |        ACGT
    #>   [4]        1       106      - |        TGCA
    #>   [5]        1   107-201      + |        ACGT
    #>   [6]        1       202      - |        TGCA
    #>   [7]        1   203-205      + |        ACGT
    #>   [8]        1       206      - |        TGCA
    #>   [9]        1   207-250      + |        ACGT
    #>   -------
    #>   seqinfo: 1 sequence from an unspecified genome; no seqlengths

That is, function automorphismByRanges permits the classification of the pairwise alignment of protein-coding sub-regions based on the mutational events observed on it quantitatively represented as automorphisms on genetic-code cubes.

Searching for automorphisms on \(\mathbb{Z}_{64}\) permits us a quantitative differentiation between mutational events at different codon positions from a given DNA protein-encoding region. As shown in reference (4) a set of different cubes can be applied to describe the best evolutionary aminoacid scale highly correlated with aminoacid physicochemical properties describing the observed evolutionary process in a given protein.

More information about this subject can be found in the supporting material from reference (4)) at GitHub GenomeAlgebra_SymmetricGroup, particularly by interacting with the Mathematica notebook Genetic-Code-Scales_of_Amino-Acids.nb.

# 5 Automorphisms between whole genomes of SARS-CoV-2 related coronaviruses

Next, the automorphism for the whole pairwise alignment of SARS-CoV-2 related coronaviruses:

    ## Do not need to run it.
    covid_autm <- automorphisms(
                        seq = covid_aln,
                        group = "Z64",
                        cube = c("ACGT", "TGCA"),
                        cube_alt = c("CATG", "GTAC"),
                        verbose = FALSE)

This data is available with the package

    data(covid_autm, package = "GenomAutomorphism")
    covid_autm
    #> Automorphism object with 9722 ranges and 8 metadata columns:
    #>          seqnames    ranges strand |        seq1        seq2         aa1         aa2    coord1    coord2      autm
    #>             <Rle> <IRanges>  <Rle> | <character> <character> <character> <character> <numeric> <numeric> <numeric>
    #>      [1]        1         1      + |         ATG         ATG           M           M        50        50         1
    #>      [2]        1         2      + |         GAG         GAG           E           E        10        10         1
    #>      [3]        1         3      + |         AGC         AGC           S           S        33        33         1
    #>      [4]        1         4      + |         CTT         CTT           L           L        55        55         1
    #>      [5]        1         5      + |         GTT         GTT           V           V        59        59         1
    #>      ...      ...       ...    ... .         ...         ...         ...         ...       ...       ...       ...
    #>   [9718]        1      9718      + |         TCA         TCA           S           S        28        28         1
    #>   [9719]        1      9719      + |         ACT         ACT           T           T        19        19         1
    #>   [9720]        1      9720      + |         CAG         CAG           Q           Q         6         6         1
    #>   [9721]        1      9721      + |         GCA         GCA           A           A        24        24         1
    #>   [9722]        1      9722      + |         TAA         TAA           *           *        12        12         1
    #>                 cube
    #>          <character>
    #>      [1]        ACGT
    #>      [2]        ACGT
    #>      [3]        ACGT
    #>      [4]        ACGT
    #>      [5]        ACGT
    #>      ...         ...
    #>   [9718]        ACGT
    #>   [9719]        ACGT
    #>   [9720]        ACGT
    #>   [9721]        ACGT
    #>   [9722]        ACGT
    #>   -------
    #>   seqinfo: 1 sequence from an unspecified genome; no seqlengths

And the summary by range

    aut_range <- automorphismByRanges(covid_autm)
    aut_range
    #> GRanges object with 460 ranges and 1 metadata column:
    #>         seqnames    ranges strand |        cube
    #>            <Rle> <IRanges>  <Rle> | <character>
    #>     [1]        1     1-102      + |        ACGT
    #>     [2]        1       103      - |        TGCA
    #>     [3]        1   104-105      + |        ACGT
    #>     [4]        1       106      - |        TGCA
    #>     [5]        1   107-201      + |        ACGT
    #>     ...      ...       ...    ... .         ...
    #>   [456]        1 9577-9608      + |        ACGT
    #>   [457]        1      9609      - |        TGCA
    #>   [458]        1 9610-9674      + |        ACGT
    #>   [459]        1      9675      - |        TGCA
    #>   [460]        1 9676-9722      + |        ACGT
    #>   -------
    #>   seqinfo: 1 sequence from an unspecified genome; no seqlengths

Regions no described by automorphism can be described as translations (labeled “Trnl”) and they can be shown as follow:

    idx = which(covid_autm$cube == "Trnl")
    covid_autm[ idx ]
    #> Automorphism object with 19 ranges and 8 metadata columns:
    #>        seqnames    ranges strand |        seq1        seq2         aa1         aa2    coord1    coord2      autm
    #>           <Rle> <IRanges>  <Rle> | <character> <character> <character> <character> <numeric> <numeric> <numeric>
    #>    [1]        1       916      + |         AAC         AAA           N           K         1         0         0
    #>    [2]        1       944      + |         ---         CCG           -           P        NA        22         0
    #>    [3]        1       971      + |         ACA         ---           T           -        16        NA         0
    #>    [4]        1      7077      + |         ---         AAA           -           K        NA         0         0
    #>    [5]        1      9109      + |         AAT         AAA           N           K         3         0         0
    #>    ...      ...       ...    ... .         ...         ...         ...         ...       ...       ...       ...
    #>   [15]        1      9277      + |         CTT         ---           L           -        55        NA         0
    #>   [16]        1      9278      + |         CAT         ---           H           -         7        NA         0
    #>   [17]        1      9279      + |         GAA         ---           E           -         8        NA         0
    #>   [18]        1      9295      + |         AAA         ---           K           -         0        NA         0
    #>   [19]        1      9296      + |         CGA         ---           R           -        36        NA         0
    #>               cube
    #>        <character>
    #>    [1]        Trnl
    #>    [2]        Trnl
    #>    [3]        Trnl
    #>    [4]        Trnl
    #>    [5]        Trnl
    #>    ...         ...
    #>   [15]        Trnl
    #>   [16]        Trnl
    #>   [17]        Trnl
    #>   [18]        Trnl
    #>   [19]        Trnl
    #>   -------
    #>   seqinfo: 1 sequence from an unspecified genome; no seqlengths

These codon positions cover insertion-deletion (indel) mutational events. The wholes regions can be summarized typing:

    idx = which(aut_range$cube == "Trnl")
    aut_range[ idx ]
    #> GRanges object with 13 ranges and 1 metadata column:
    #>        seqnames    ranges strand |        cube
    #>           <Rle> <IRanges>  <Rle> | <character>
    #>    [1]        1       916      + |        Trnl
    #>    [2]        1       944      + |        Trnl
    #>    [3]        1       971      + |        Trnl
    #>    [4]        1      7077      + |        Trnl
    #>    [5]        1      9109      + |        Trnl
    #>    ...      ...       ...    ... .         ...
    #>    [9]        1 9244-9245      + |        Trnl
    #>   [10]        1      9247      + |        Trnl
    #>   [11]        1      9257      + |        Trnl
    #>   [12]        1 9277-9279      + |        Trnl
    #>   [13]        1 9295-9296      + |        Trnl
    #>   -------
    #>   seqinfo: 1 sequence from an unspecified genome; no seqlengths

Only one indel mutation was found in the region where the spike glycoprotein is located: 7076 - 8331. That is, the pairwise alignment of SARS coronavirus GZ02 and Bat SARS-like coronavirus (bat-SL-CoVZC45) reveals 8 single indel mutational events, four regions with two indel mutations and one region with 3 indel mutations.

    data.frame(aut_range[idx])
    #>    seqnames start  end width strand cube
    #> 1         1   916  916     1      + Trnl
    #> 2         1   944  944     1      + Trnl
    #> 3         1   971  971     1      + Trnl
    #> 4         1  7077 7077     1      + Trnl
    #> 5         1  9109 9109     1      + Trnl
    #> 6         1  9188 9189     2      + Trnl
    #> 7         1  9230 9230     1      + Trnl
    #> 8         1  9234 9235     2      + Trnl
    #> 9         1  9244 9245     2      + Trnl
    #> 10        1  9247 9247     1      + Trnl
    #> 11        1  9257 9257     1      + Trnl
    #> 12        1  9277 9279     3      + Trnl
    #> 13        1  9295 9296     2      + Trnl

    ## region width
    width(aut_range[ idx ])
    #>  [1] 1 1 1 1 1 2 1 2 2 1 1 3 2

In general, indel mutational event can be modeled as translations on \(\mathbb{Z}_{64}\).

## 5.1 Bar plot automorphism distribution by cubes

The automorphism distribution by cubes can be summarized in the bar-plot graphic

    counts <- table(covid_autm$cube[ covid_autm$autm != 1 |
                                        is.na(covid_autm$autm) ])

    par(family = "serif", cex = 0.9, font = 2, mar=c(4,6,4,4))
    barplot(counts, main="Automorphism distribution",
            xlab="Genetic-code cube representation",
            ylab="Fixed mutational events",
            col=c("darkblue","red", "darkgreen"),
            border = NA, axes = FALSE,
            cex.lab = 2, cex.main = 1.5, cex.names = 2)
    axis(2, at = c(0, 200, 400, 600, 800), cex.axis = 1.5)
    mtext(side = 1,line = -1.5, at = c(0.7, 1.9, 3.1, 4.3, 5.5),
        text = paste0( counts ), cex = 1.4,
        col = c("white","yellow", "black"))

## 5.2 Grouping automorphism by automorphism’s coefficients. Types of mutations

    autby_coef <- automorphism_bycoef(covid_autm)
    autby_coef <- autby_coef[ autby_coef$autm != 1 & autby_coef$autm != -1  ]

Barplot of frequency of mutation types greater than 2.

    counts <- table(autby_coef$mut_type)
    counts <- sort(counts, decreasing = TRUE)
    count. <- counts[ counts > 2 ]

    par(family = "serif", cex.axis = 2, font = 2, las = 1,
        cex.main = 1.4, mar = c(6,2,4,4))
    barplot(count., main="Automorphism distribution per Mutation type",
            col = colorRampPalette(c("red", "yellow", "blue"))(36),
            border = NA, axes = FALSE,las=2)
    axis(side = 2,  cex.axis = 2, line = -1.8 )

Every single base mutational event across the MSA was classified according IUPAC nomenclature: 1) According to the number of hydrogen bonds (on DNA/RNA double helix): strong S={C, G} (three hydrogen bonds) and weak W={A, U} (two hydrogen bonds). According to the chemical type: purines R={A, G} and pyrimidines Y={C, U}. 3). According to the presence of amino or keto groups on the base rings: amino M={C, A} and keto K={G, T}. Constant (hold) base positions were labeled with letter H. So, codon positions labeled as HKH means that the first and third bases remains constant and mutational events between bases G and T were found in the MSA.

    counts
    #>
    #> HHY HHR HHW YHH HHK HHM RHH HRH HYH --- HHS MHH WHH HMH KHH HYW YHW RHK RHY WHW YHM YHY HKH HMR HRR HRY HWH KHW RYY YHK
    #> 425 189  89  34  32  25  24  18  18  16  13  12  11   7   6   5   5   4   4   4   4   4   3   3   3   3   3   3   3   3
    #> YHR HMW HYK KHY KSW MHK MHW MRH RHM RHR RHW RKW RMH RMW RRY RSW RYH RYW SHH SHW SRH WMH WMS WSY YWH HKK HKR HMK HMY HSR
    #>   3   2   2   2   2   2   2   2   2   2   2   2   2   2   2   2   2   2   2   2   2   2   2   2   2   1   1   1   1   1
    #> HWS HWW HWY HYR HYY KHK KHR KKS KMH KMW KRK KRY KSH MHR MHS MKM MMM MRM MWH MWM MWS MWW MYY RMY RRK RRM RSK RYK SHM SHY
    #>   1   1   1   1   1   1   1   1   1   1   1   1   1   1   1   1   1   1   1   1   1   1   1   1   1   1   1   1   1   1
    #> SKY SMW SRM SWR SWY SYH WHY WRH WRY WWH WWK WWS WWY WYH WYM WYW YHS YKH YKY YRY YWM YWW YWY YYH YYR
    #>   1   1   1   1   1   1   1   1   1   1   1   1   1   1   1   1   1   1   1   1   1   1   1   1   1

The analysis of the frequency of mutational events (automorphisms, COVID: human SARS coronavirus GZ02 vs Bat SARS-like coronavirus isolate at-SL-CoVZC45) by mutation types is shown in the last figure. Results are consistent with the well-known observation highlighted by Crick: the highest mutational rate is found in the third base of the codon (HHY: 425, HHR: 189, HHW: 88), followed by YHH: 34 in the first base, and the lowest rate is found in the second one (5).

## 5.3 Conserved and non-conserved regions

### 5.3.1 Conserved regions

Conserved and non-conserved gene regions can be easily observed in most of MSA editing bioinformatic tools. However, here were interesting into get the regions coordinates for further downstream analysis.

Conserved regions from pairwise comparisons are obtain with function conserved_regions:

    conserv <- conserved_regions(covid_autm)
    conserv
    #> AutomorphismByCoef object with 6348 ranges and 7 metadata columns:
    #>          seqnames    ranges strand |        seq1        seq2         aa1         aa2      autm    mut_type        cube
    #>             <Rle> <IRanges>  <Rle> | <character> <character> <character> <character> <numeric> <character> <character>
    #>      [1]        1      1-19      + |         ATG         ATG           M           M         1         HHH        ACGT
    #>      [2]        1      1-19      + |         GAG         GAG           E           E         1         HHH        ACGT
    #>      [3]        1      1-19      + |         AGC         AGC           S           S         1         HHH        ACGT
    #>      [4]        1      1-19      + |         CTT         CTT           L           L         1         HHH        ACGT
    #>      [5]        1      1-19      + |         GTT         GTT           V           V         1         HHH        ACGT
    #>      ...      ...       ...    ... .         ...         ...         ...         ...       ...         ...         ...
    #>   [6344]        1 9683-9722      + |         GGA         GGA           G           G         1         HHH        ACGT
    #>   [6345]        1 9683-9722      + |         TCT         TCT           S           S         1         HHH        ACGT
    #>   [6346]        1 9683-9722      + |         TCA         TCA           S           S         1         HHH        ACGT
    #>   [6347]        1 9683-9722      + |         GCA         GCA           A           A         1         HHH        ACGT
    #>   [6348]        1 9683-9722      + |         TAA         TAA           *           *         1         HHH        ACGT
    #>   -------
    #>   seqinfo: 1 sequence from an unspecified genome; no seqlengths

Several regions are similar for more than one comparison.

    conserv_unique <- conserved_regions(covid_autm, output = "unique")
    conserv_unique
    #> GRanges object with 744 ranges and 2 metadata columns:
    #>         seqnames    ranges strand |      autm        cube
    #>            <Rle> <IRanges>  <Rle> | <numeric> <character>
    #>     [1]        1      1-19      + |         1        ACGT
    #>     [2]        1     21-44      + |         1        ACGT
    #>     [3]        1     47-52      + |         1        ACGT
    #>     [4]        1     54-60      + |         1        ACGT
    #>     [5]        1     62-80      + |         1        ACGT
    #>     ...      ...       ...    ... .       ...         ...
    #>   [740]        1 9610-9614      + |         1        ACGT
    #>   [741]        1 9616-9648      + |         1        ACGT
    #>   [742]        1 9650-9674      + |         1        ACGT
    #>   [743]        1 9676-9681      + |         1        ACGT
    #>   [744]        1 9683-9722      + |         1        ACGT
    #>   -------
    #>   seqinfo: 1 sequence from an unspecified genome; no seqlengths

# 6 Automorphisms on \(\mathbb{Z}_{125}\)

Alternatively, we can use the algebraic representation on on \(\mathbb{Z}_{125}\).

    autm_z125 <- automorphisms(
                        seq = covid_aln,
                        group = "Z125",
                        cube = c("ACGT", "TGCA"),
                        cube_alt = c("CATG", "GTAC"),
                        verbose = FALSE)

For the sake of reducing computational time in this example, ‘autm_z125’ is available with the package.

    data(autm_z125, package = "GenomAutomorphism")
    autm_z125
    #> Automorphism object with 9722 ranges and 8 metadata columns:
    #>          seqnames    ranges strand |        seq1        seq2         aa1         aa2    coord1    coord2      autm
    #>             <Rle> <IRanges>  <Rle> | <character> <character> <character> <character> <numeric> <numeric> <numeric>
    #>      [1]        1         1      + |         ATG         ATG           M           M       108       108         1
    #>      [2]        1         2      + |         GAG         GAG           E           E        43        43         1
    #>      [3]        1         3      + |         AGC         AGC           S           S        82        82         1
    #>      [4]        1         4      + |         CTT         CTT           L           L       114       114         1
    #>      [5]        1         5      + |         GTT         GTT           V           V       119       119         1
    #>      ...      ...       ...    ... .         ...         ...         ...         ...       ...       ...       ...
    #>   [9718]        1      9718      + |         TCA         TCA           S           S        71        71         1
    #>   [9719]        1      9719      + |         ACT         ACT           T           T        59        59         1
    #>   [9720]        1      9720      + |         CAG         CAG           Q           Q        38        38         1
    #>   [9721]        1      9721      + |         GCA         GCA           A           A        66        66         1
    #>   [9722]        1      9722      + |         TAA         TAA           *           *        46        46         1
    #>                 cube
    #>          <character>
    #>      [1]        ACGT
    #>      [2]        ACGT
    #>      [3]        ACGT
    #>      [4]        ACGT
    #>      [5]        ACGT
    #>      ...         ...
    #>   [9718]        ACGT
    #>   [9719]        ACGT
    #>   [9720]        ACGT
    #>   [9721]        ACGT
    #>   [9722]        ACGT
    #>   -------
    #>   seqinfo: 1 sequence from an unspecified genome; no seqlengths

And the summary by range

    aut_range_2 <- automorphismByRanges(autm_z125)
    aut_range_2
    #> GRanges object with 21 ranges and 1 metadata column:
    #>        seqnames    ranges strand |        cube
    #>           <Rle> <IRanges>  <Rle> | <character>
    #>    [1]        1     1-943      + |        ACGT
    #>    [2]        1       944      + |        Trnl
    #>    [3]        1   945-970      + |        ACGT
    #>    [4]        1       971      + |        Trnl
    #>    [5]        1  972-7076      + |        ACGT
    #>    ...      ...       ...    ... .         ...
    #>   [17]        1 9258-9276      + |        ACGT
    #>   [18]        1 9277-9279      + |        Trnl
    #>   [19]        1 9280-9294      + |        ACGT
    #>   [20]        1 9295-9296      + |        Trnl
    #>   [21]        1 9297-9722      + |        ACGT
    #>   -------
    #>   seqinfo: 1 sequence from an unspecified genome; no seqlengths

The whole genome can be described by automorphisms on \(\mathbb{Z}_{125}\).

    counts <- table(autm_z125$cube[ autm_z125$autm != 1 ])

    par(family = "serif", cex = 1, font = 2)
    barplot(counts, main="Automorphism distribution",
            xlab="Genetic-code cube representation",
            ylab="Fixed mutational events",
            col=c("darkblue","red"),
            ylim = c(0, 1300),
            border = NA, axes = TRUE)
    mtext(side = 1,line = -2, at = c(0.7, 1.9, 3.1),
        text = paste0( counts ), cex = 1.4,
        col = c("white","red"))

# 7 Automorphisms on the Genetic-code Cube Representation on GF(5)

The Genetic-code Cube Representations on the Galois Field GF(5) were studied in (4). Each codon is represented by each coordinate in the 3D space.

Automorphisms are represented by diagonal matrices, with elements \(x\) in \(x \in \mathbb{Z}_5\).

    autm_3d <- automorphisms(
                        seq = covid_aln,
                        group = "Z5^3",
                        cube = c("ACGT", "TGCA"),
                        cube_alt = c("CATG", "GTAC"),
                        verbose = FALSE)

The result is available with package

    data(autm_3d, package = "GenomAutomorphism")
    autm_3d
    #> Automorphism object with 9722 ranges and 8 metadata columns:
    #>          seqnames    ranges strand |        seq1        seq2         aa1         aa2   coord1   coord2        autm
    #>             <Rle> <IRanges>  <Rle> | <character> <character> <character> <character> <matrix> <matrix> <character>
    #>      [1]        1         1      + |         ATG         ATG           M           M    1:4:3    1:4:3       1,1,1
    #>      [2]        1         2      + |         GAG         GAG           E           E    3:1:3    3:1:3       1,1,1
    #>      [3]        1         3      + |         AGC         AGC           S           S    1:3:2    1:3:2       1,1,1
    #>      [4]        1         4      + |         CTT         CTT           L           L    2:4:4    2:4:4       1,1,1
    #>      [5]        1         5      + |         GTT         GTT           V           V    3:4:4    3:4:4       1,1,1
    #>      ...      ...       ...    ... .         ...         ...         ...         ...      ...      ...         ...
    #>   [9718]        1      9718      + |         TCA         TCA           S           S    4:2:1    4:2:1       1,1,1
    #>   [9719]        1      9719      + |         ACT         ACT           T           T    1:2:4    1:2:4       1,1,1
    #>   [9720]        1      9720      + |         CAG         CAG           Q           Q    2:1:3    2:1:3       1,1,1
    #>   [9721]        1      9721      + |         GCA         GCA           A           A    3:2:1    3:2:1       1,1,1
    #>   [9722]        1      9722      + |         TAA         TAA           *           *    4:1:1    4:1:1       1,1,1
    #>                 cube
    #>          <character>
    #>      [1]        ACGT
    #>      [2]        ACGT
    #>      [3]        ACGT
    #>      [4]        ACGT
    #>      [5]        ACGT
    #>      ...         ...
    #>   [9718]        ACGT
    #>   [9719]        ACGT
    #>   [9720]        ACGT
    #>   [9721]        ACGT
    #>   [9722]        ACGT
    #>   -------
    #>   seqinfo: 1 sequence from an unspecified genome; no seqlengths

## 7.1 Grouping automorphism by automorphism’s coefficients

Automorphisms that preserved codons (DNA base-triplets) are represented by the identity matrix, i.e., the matrix with diagonal elements “1,1,1”.

    autby_coef_3d <- automorphism_bycoef(autm_3d)
    autby_coef_3d <- autby_coef_3d[ autby_coef_3d$autm != "1,1,1" ]
    autby_coef_3d
    #> AutomorphismByCoef object with 1083 ranges and 7 metadata columns:
    #>          seqnames    ranges strand |        seq1        seq2         aa1         aa2        autm    mut_type
    #>             <Rle> <IRanges>  <Rle> | <character> <character> <character> <character> <character> <character>
    #>      [1]        1        20      + |         GTC         GTT           V           V       1,1,2         HHY
    #>      [2]        1     45-46      + |         CAC         CAT           H           H       1,1,2         HHY
    #>      [3]        1     45-46      + |         CTC         CTT           L           L       1,1,2         HHY
    #>      [4]        1        53      + |         CTA         TTA           L           L       2,1,1         YHH
    #>      [5]        1        61      + |         CTG         TTG           L           L       2,1,1         YHH
    #>      ...      ...       ...    ... .         ...         ...         ...         ...         ...         ...
    #>   [1079]        1      9609      + |         CCA         CCG           P           P       1,1,3         HHR
    #>   [1080]        1      9615      + |         TTT         TTC           F           F       1,1,3         HHY
    #>   [1081]        1      9649      + |         AAC         AGC           N           S       1,3,1         HRH
    #>   [1082]        1      9675      + |         AAA         AAG           K           K       1,1,3         HHR
    #>   [1083]        1      9682      + |         TTG         TTA           L           L       1,1,2         HHR
    #>                 cube
    #>          <character>
    #>      [1]        ACGT
    #>      [2]        ACGT
    #>      [3]        ACGT
    #>      [4]        ACGT
    #>      [5]        ACGT
    #>      ...         ...
    #>   [1079]        ACGT
    #>   [1080]        ACGT
    #>   [1081]        ACGT
    #>   [1082]        ACGT
    #>   [1083]        ACGT
    #>   -------
    #>   seqinfo: 1 sequence from an unspecified genome; no seqlengths

Conserved regions from pairwise comparisons are obtain with function conserved_regions:

    conserv <- conserved_regions(autm_3d)
    conserv
    #> AutomorphismByCoef object with 6348 ranges and 7 metadata columns:
    #>          seqnames    ranges strand |        seq1        seq2         aa1         aa2        autm    mut_type
    #>             <Rle> <IRanges>  <Rle> | <character> <character> <character> <character> <character> <character>
    #>      [1]        1      1-19      + |         ATG         ATG           M           M       1,1,1         HHH
    #>      [2]        1      1-19      + |         GAG         GAG           E           E       1,1,1         HHH
    #>      [3]        1      1-19      + |         AGC         AGC           S           S       1,1,1         HHH
    #>      [4]        1      1-19      + |         CTT         CTT           L           L       1,1,1         HHH
    #>      [5]        1      1-19      + |         GTT         GTT           V           V       1,1,1         HHH
    #>      ...      ...       ...    ... .         ...         ...         ...         ...         ...         ...
    #>   [6344]        1 9683-9722      + |         GGA         GGA           G           G       1,1,1         HHH
    #>   [6345]        1 9683-9722      + |         TCT         TCT           S           S       1,1,1         HHH
    #>   [6346]        1 9683-9722      + |         TCA         TCA           S           S       1,1,1         HHH
    #>   [6347]        1 9683-9722      + |         GCA         GCA           A           A       1,1,1         HHH
    #>   [6348]        1 9683-9722      + |         TAA         TAA           *           *       1,1,1         HHH
    #>                 cube
    #>          <character>
    #>      [1]        ACGT
    #>      [2]        ACGT
    #>      [3]        ACGT
    #>      [4]        ACGT
    #>      [5]        ACGT
    #>      ...         ...
    #>   [6344]        ACGT
    #>   [6345]        ACGT
    #>   [6346]        ACGT
    #>   [6347]        ACGT
    #>   [6348]        ACGT
    #>   -------
    #>   seqinfo: 1 sequence from an unspecified genome; no seqlengths

The whole genome mutational events represented as automorphisms on the 3D space \(\mathbb{Z}_{5}^3\), specifically on the cube ACGT (see 4).

    counts <- table(autby_coef_3d$cube[ autby_coef_3d$autm != "1,1,1"])

    par(family = "serif", cex = 1, font = 2, cex.main = 1)
    barplot(counts, main="Automorphism distribution",
            xlab="Genetic-code cube representation",
            ylab="Fixed mutational events",
            col=c("darkblue","red"),
            ylim = c(0, 1300),
            border = NA, axes = TRUE)
    mtext(side = 1,line = -2, at = c(0.7, 1.9),
        text = paste0( counts ), cex = 1.4,
        col = c("white"))

# 8 References

# Appendix

    1. R. Sanchez. Symmetric Group of the Genetic-Code Cubes.
    Effect of the Genetic-Code Architecture on the Evolutionary Process MATCH
    Commun. Math. Comput. Chem. 79 (2018) 527-560.
    [PDF](https://bit.ly/2Z9mjM7).

    2. Sanchez R, Morgado E, Grau R. Gene algebra from a
    genetic code algebraic structure. J Math Biol. 2005 Oct;51(4):431-57.
    doi:10.1007/s00285-005-0332-8. Epub 2005 Jul 13. PMID: 16012800.
    ([PDF](https://arxiv.org/pdf/q-bio/0412033.pdf)).

    3. Robersy Sanchez, Jesus Barreto (2021) Genomic Abelian
    Finite Groups.
    [doi:10.1101/2021.06.01.446543](https://doi.org/10.1101/2021.06.01.446543)

    4. M. V Jose, E.R. Morgado, R. Sanchez, T. Govezensky,
    The 24 possible algebraic representations of the standard genetic code in
    six or in three dimensions, Adv. Stud. Biol. 4 (2012) 119-152.
    [PDF](https://is.gd/na9eap).

    5. Crick FHC. The Origin of the Genetic Code. J Mol Biol.
    1968;38: 367–379.

# Session info

Here is the output of `sessionInfo()` on the system on which this document was compiled:

    #> R version 4.3.0 RC (2023-04-18 r84287 ucrt)
    #> Platform: x86_64-w64-mingw32/x64 (64-bit)
    #> Running under: Windows Server 2022 x64 (build 20348)
    #>
    #> Matrix products: default
    #>
    #>
    #> locale:
    #> [1] LC_COLLATE=C                           LC_CTYPE=English_United States.utf8    LC_MONETARY=English_United States.utf8
    #> [4] LC_NUMERIC=C                           LC_TIME=English_United States.utf8
    #>
    #> time zone: America/New_York
    #> tzcode source: internal
    #>
    #> attached base packages:
    #> [1] stats4    stats     graphics  grDevices utils     datasets  methods   base
    #>
    #> other attached packages:
    #> [1] GenomAutomorphism_1.3.0 Biostrings_2.69.0       GenomeInfoDb_1.37.0     XVector_0.41.0
    #> [5] IRanges_2.35.0          S4Vectors_0.39.0        BiocGenerics_0.47.0     BiocStyle_2.29.0
    #>
    #> loaded via a namespace (and not attached):
    #>  [1] sass_0.4.5              utf8_1.2.3              generics_0.1.3          bitops_1.0-7
    #>  [5] numbers_0.8-5           digest_0.6.31           magrittr_2.0.3          evaluate_0.20
    #>  [9] bookdown_0.33           iterators_1.0.14        fastmap_1.1.1           foreach_1.5.2
    #> [13] doParallel_1.0.17       jsonlite_1.8.4          BiocManager_1.30.20     fansi_1.0.4
    #> [17] codetools_0.2-19        jquerylib_0.1.4         cli_3.6.1               rlang_1.1.0
    #> [21] crayon_1.5.2            cachem_1.0.7            yaml_2.3.7              tools_4.3.0
    #> [25] parallel_4.3.0          BiocParallel_1.35.0     dplyr_1.1.2             GenomeInfoDbData_1.2.10
    #> [29] vctrs_0.6.2             R6_2.5.1                lifecycle_1.0.3         magick_2.7.4
    #> [33] zlibbioc_1.47.0         pkgconfig_2.0.3         bslib_0.4.2             pillar_1.9.0
    #> [37] data.table_1.14.8       glue_1.6.2              Rcpp_1.0.10             xfun_0.39
    #> [41] tibble_3.2.1            GenomicRanges_1.53.0    tidyselect_1.2.0        highr_0.10
    #> [45] knitr_1.42              htmltools_0.5.5         snow_0.4-4              rmarkdown_2.21
    #> [49] compiler_4.3.0          RCurl_1.98-1.12